MAXX CNC Aluminum Hop Up Chamber M4W For Wolverine MTW

MAXX CNC Aluminum Hop Up Chamber M4W For Wolverine MTW

CNC Aluminum Hopup Chamber M4W unit is precisely machined to perform accurately and consistently on HPA MTW Milspec, Forged, Billet and MTW-9 series. The Hopup Chamber M4W unit is built with an aluminum Rotary Dial Knob for fine hopup adjustments, the precision Hopup Lever and 4mm Bucking Nubs (6mm Bucking Nubs are optional) to perform best with R-Hop and Standard-Hop to keep the BB shooting accurately and consistently on every single shot. The Hopup Chamber M4W unit is designed to accept the HPA MTW Engine M4 nozzle length, and fully compatible with most aftermarket soft and hard rubber buckings without losing FPS or dropping BB during use. The Hopup Chamber M4W unit is wisely equipped with an interchangeable Inlet Adaptor OD11mm to ensure the hopup unit is inserted exactly in the center of the 11mm inner bore HPA Engine nozzle outlet without wobbling. (Inlet Adaptor OD11.5mm and OD12mm are optional) Also mounted the removable CNC Brass Side Wings to slide smoothly into the outer barrel slots, and included an advanced CNC Delrin Locking C-Clip to hold the inner barrel tight in place without wobbling and twisting. MAXX CNC Aluminum Hop Up Chamber M4W For Wolverine MTW Machined from a solid aircraft aluminum block with tight tolerances to achieve the most accuracy, consistency, and durability Performed accurately and consistently on HPA MTW Milspec, Forged, Billet and MTW-9 series Precision Rotary Dial Knob for fine hopup adjustments Re-engineered the precision Hopup Lever and 4mm Bucking Nubs (6mm Bucking Nubs are optional) to perform best with R-Hop and Standard-Hop to keep the BB shooting accurately and consistently on every single shot Removable Steel Pivot Pin for ease of setup and maintenance Accepted the HPA MTW Engine M4 nozzle length Fully compatible with most aftermarket soft and hard rubber buckings without losing FPS or dropping BB during use Wisely equipped with an interchangeable Inlet Adaptor OD11mm to ensure the hopup unit is inserted exactly in the c

Brand
MAXX
Category
gear
From
83.07 USD

Where to buy

Specs

AR/M4 SERIES